Bolt Down Dining Table Base
Model Number: JIP3-7RDTP12SQDN
Overall Height: 28.5"
Weight: 10 lbs.
Base Plate: 7.5" dia.,16ga. metal cover over 5/16" thick steel plate
Top Plate: 12" x 12" square stamped steel
Metal Column: 3" dia., 16 gauge steel
Finish: Black wrinkle
Note: the column is welded to the top plate. Floor anchors not included.
*MAXIMUM SIZE FOR ONE TABLE BASE IS 30" x 42"
Bolt Down Bases Recommended Size Explanation
JI Bases does not supply floor attaching hardware, nor give recommendations for hardware.
These decisions need to be made by the installer based on the type and condition of the floor.
The
recommended 30" x 42" maximum size restriction is based on the premise
that only one person will sit at the end of the 42" length. Therefore,
when using the top for support in rising from the table, the torque on
the floor bolts is limited.
With a 30" width top, two people
sitting on one side of the table using the top for support in rising
from the table also limits the torque on the floor bolts.
Increasing
the width or length beyond the recommended one fixed base per 30" x 42"
top may cause too much torque on the floor bolts.
Additional bases can be added to support longer tops based on one base per 42" in length.
