-
Full Showtime system control
-
Computer video/audio inputs
-
Input selection/volume control
-
RS-232 input for remote configuration
-
Lockout capability
-
Pass-through AC and network connection
Showtime Tilt 'N Plug Controller with VGA input plate, Dual Network and AC Power
The YZ820-106 is a tabletop interconnection solution designed for
installation into a conference table as part of a Showtime presentation
system and provides a way of connecting audiovisual equipment on top of
the furniture to the Showtime presentation system below the furniture or
in the ceiling. The control keypad has 8 input select keys, an audio
mute key, a power on/off key, and a volume control knob.
Each control key has an internal LED indicating the active selection.
Above the control knob are 5 LEDs that indicate the volume level from
minimum (all LEDs off) to maximum (all LEDs on). In addition to control
and volume adjustments, the controller has a 3.5 mm input jack for
RS-232 communication using a custom cable provided with each switcher
installation kit (AC405-100).
The switcher configuration can be modified from the YZ820-106
controller without having to go into the ceiling for direct access to
the switcher. Additionally, the controller can be "locked out" to
prevent unauthorized or accidental changes during a presentation. The
computer video/audio inputs allow the video and audio from a computer to
be presented through the Showtime system from the tabletop. The audio
input uses a 3.5 mm jack and the computer input is a standard VGA 15-pin
HD female connector. The signals are combined and output over two
standard CAT-5 cables attached to the bottom of the unit. External power
is not required since the unit receives power from the Showtime
switcher.
There is a Power/Signal Present LED next to the computer audio input.
The computer video input module receives power from the switcher when
the projector power is turned on. The LED is on and red if the unit has
power and changes from red to green when a valid computer video signal
is present. The YZ820-106 input panel is accessible by pushing down on
the top cover. The unit then auto tilts open with help from an internal
pneumatic spring. Once open, the input plate remains securely in place.
The input plate is hidden by pressing down on the top cover until the
latching mechanism engages. In its closed position, the top panel lies
flush with the tabletop until needed again. The YZ820-106 comes with a
standard top and bezel offering a high quality matte black finish. Other
finishes or special bezel configurations are available upon request.
Please contact an ALTINEX representative to discuss custom options. |
